Dyno Tuning Shop in Orem, UT | Car Tuning

At Turbo Lab we are here to fulfill your tuning needs offering two in house dynos:

Dynojet 424xLC2 AWD dual eddy current dynamometer with linksys. The 424xLC2 features 2 x 24″ knurled, precision balanced drums, Linksys, 2x Eddy Current Load Absorption Units, measures up to 2000 hp, 2000 ft. lbs, 200 mph, and is capable of 1600hp peak absorption (in AWD) making it the most powerful load control dynamometer on the market.

Dynojet 248x The 248 dynamometer features a 48″ knurled, precision balanced drum, a 2000-hp / 2000 ft. lbs measurement capacity and a max speed of 200 mph.

These are the industry’s best dynamometers offering consistent and unalterable dyno numbers.

FAQ’s

Can you tune the software I already purchased for my vehicle?

Yes!We have well rounded experience in nearly all tuner software.AEM, AEM Infinity, HP Tuner, Motec, Hondata, Predator, Diablo, Cobb Access Port, Autotronic, Haltec and more.

What vehicles do you specialize in?

At Turbo Lab we are not beholden to a single brand of vehicle thus we have tuned a very wide range of car models and have written numerous tunes for each.We are confident in every single vehicle we bring in our shop.If for some reason there is a car model we haven’t tuned or software we are not familiar with we are completely upfront with our customers.

Is a Turbo Lab tune better?

In short, yes.We have certified tuners to ensure proper and thorough tune of your vehicle.We will review your expectations for your tune whether it’s to have high reliability with good power or the highest horsepower possible.We also are not in the business of high volume quick turn around tunes.We will spend as much time as it takes to make sure your tune is right.Mail order tunes are understandably growing in popularity but are still not exactly tailored to your vehicle so we take the extra time to make each tune vehicle specific.

Why are your tunes more expensive than some of the other shops?

The better question is why are other shops tunes so cheap?The old saying rings true with tuning too, you get what you pay for!

Our pricing is based to fulfill the following criteria:

Certified tuners
As long as it takes to make sure the tune is right
Warranty our tunes
Better Service
We always tune on the dyno, no street tunes (this offers a full range of parameters so nothing gets left out)
Brand new dynamometer facility plus your choice of a road force 2wd dyno or dual eddy current 4wd dyno both on premisis!

Why is a dual eddy current dyno with Linksys better?

The first benefit of mechanically linked front and rear wheels is the protection of center differentials and transfer cases. Unlike unlinked dyno rollers all four wheels spin at exactly the same rate eliminating the potential for drivetrain damage. Some vehicles won’t run properly without a linked dyno due to the inability to turn off factory traction or abs control which is the second large benefit. The final point to mention is that no lights will be triggered alerting the factory ecu of improper performance or wheel slippage (also alerting anyone monitoring the factory ecu for tampering or abuse). The benefits to those with high end vehicles not wishing to void their warranty should be obvious.

Are there benefits to an inground installed dyno vs an above ground dyno?

There are many benefits to an in-ground dyno over an above ground dyno the main one being it offers easy drive in of your vehicle with essentially no fear of excess movement and better access to retaining straps and retention points. Also offers much better viewing for recording or sound streams.

If I make more modifications to my car after its tuned do you offer re-tune discounts?

Yes! Each time you modify your vehicle after it has been tuned, it will need to be re-tuned.

When can I get my car on the Dyno?

We try to give our tuning customers first priority and can often times schedule you the same day or within a few days of calling.

Turbo Lab offers product testing on the dyno. We have tested various products especially those dealing with increase fuel efficiency. We even have investors, product design, and packaging resources to help your product sell. Please call today to discuss how we can help you with your product.

Dyno Tuning